Janome JEF CompactFlash Card - Writing Files
Use this command if you want to write designs to Janome
JEF CompactFlash Card. It is supposed, that you have the Janome ATA card
inserted in the PCMCIA slot of your notebook, or card reader/writer hardware
attached to your PC, and that this card works like another disk drive
on your PC (e.g. drive F:).
1 - Run Embird, it will
start in "Manager" mode.
2 - In the "Files:" box at the right side of the screen select the
design which you want to write to Janome
JEF CompactFlash Card. To select a design, please move the mouse pointer to its file name and
click the left mouse button (Picture No. 1). You can select multiple
files: Move mouse pointer to the file name of the
first design in the "Files:" box at the right side of the screen, depress the
left mouse button and hold it down while moving the mouse pointer over
the file names of the other designs. When the mouse pointer is over the
last design, please release the
left mouse button.
Picture No. 1
3 - Select "Right Panel -> Input/Output Operations -> Janome JEF CompactFlash Card" command from the main menu (Picture No. 2).
Picture No. 2
4 - A dialog box will appear on the screen (Picture No. 3).
Choose the "Drive:" which contains CompactFlash card. In this example it is
"F:" drive. The upper box shows the folders and files of
Janome JEF CompactFlash Card (empty card in this example).
5 - The bottom box shows the files which you are going to write to the
card (Picture No. 3). Click "Write files to card" button to start writing of designs to the card.
Picture No. 3

Picture No. 4

Picture No. 5

8 - Janome JEF CompactFlash Card is now ready for use. You can eject it from the disk drive and use it with your embroidery machine.