Output to EMD Smart Media Card
Output to EMD Smart Media Card
Use this command to write designs to EMD
Smart Media Cardl; either for Elna or for Singer embroidery machine. It is supposed, that you have the Smart Media Card
reader attached to your PC, and that this card reader works like another disk drive
on your PC (e.g. drive F:).
1 - Run Embird, it will
start in "Manager" mode.
2 - In the "Files:" box at the right side of the screen select the
design which you want to write to EMD Smart Media Card.
To select a design, please move the mouse pointer to its file name and
click the left mouse button (Picture No. 1).
You can select multiple
files: Move mouse pointer to the file name of the
first design in the "Files:" box at the right side of the screen, depress the
left mouse button and hold it down while moving the mouse pointer over
the file names of the other designs. When the mouse pointer is over the
last design, please release the
left mouse button.
Picture No. 1
3 - Select "Right Panel -> Input/Output Operations -> Output to Elna (or Singer) EMD Smart Media Card" command from the main menu (Picture No. 2).
Picture No. 2
4 - A dialog box will appear on the screen (Picture No. 3).
Choose the "Drive:" which contains EMD Smart Media Card. In this example it is
"F:" drive. The upper box shows the folders and files of EMD
Smart Media Card (empty card in this example).
5 - Switch ON the "Erase card contents before writing new designs"
option if you want to delete all designs which are already stored on the
card (Picture No. 3).
6 - The bottom box shows the files which you are going to write to the
card (Picture No. 3). Click "Write files to card" button to start writing of designs to the card.
Picture No. 3
Picture No. 4
