Barudan CF Card - Writing Files
Barudan CF Card - Writing Files
Use this command if you want to write designs to Barudan
CF (Compact Flash) Card. It is supposed, that you have the CF Card Reader hardware
attached to your PC, and that this reader works like another disk drive
on your PC (e.g. drive F:).
1 - Run Embird, it will
start in "Manager" mode.
2 - In the "Files:" box at the right side of the screen select the
design which you want to write to Barudan CF Card.
To select a design, please move the mouse pointer to its file name and
click the left mouse button (Picture No. 1). You can select multiple
files: Move mouse pointer to the file name of the
first design in the "Files:" box at the right side of the screen, depress the
left mouse button and hold it down while moving the mouse pointer over
the file names of the other designs. When the mouse pointer is over the
last design, please release the
left mouse button.
Picture No. 1
3 - Select "Right Panel -> Input/Output Operations -> Barudan CF Card" command from the main menu (Picture No. 2).
Picture No. 2
4 - A dialog box will appear on the screen (Picture No. 3).
Choose the "Drive:" which contains Barudan CF Card. In this example it is
"F:" drive. The upper box shows the folders and files of
Barudan CF Card (empty card in this example).
5 - Click "Create new folder" button to create a new folder
for the designs and choose this folder in the "Folder" box. In
this example we have created "Embird.fdr" folder (see below in
Picture No. 4).
6 - The bottom box shows the files which you are going to write to the
card (Picture No. 3). Click "Write files to card" button to start writing of designs to the card.
Picture No. 3
Picture No. 4
8 - Barudan CF Card is now ready for use. You can eject it from the disk drive and use it with your embroidery machine.